Flagship CNC tube cutting center for heavy round, square, rectangular, and shaped profiles. 3 synchronized chucks eliminate pipe bending and ensure 100% material utilization with zero tailing scrap.
Key Machine Subsystems & Technologies
Heavy structural engineering, intelligent bus CNC, and high-precision fiber optics
Three synchronized full-rotation pneumatic chucks with dual clamping eliminating tube sag and vibration
Zero-Tailing technology: complete profile cutting with zero remnant scrap, saving expensive stock
Bochu FSCUT5000 / TubePro bus CNC system featuring full 3D simulation and intelligent nesting via Cuts3D
Optional 3D beveling cutting head for precision weld prep bevels up to ±45° on round and rectangular pipes
Technical Specification Matrix
Official factory specifications across all model modifications
| Engineering Parameter | P3Datasheet↗ | P3 PRODatasheet↗ | P5Datasheet↗ | P5 PRODatasheet↗ |
|---|---|---|---|---|
| Max. Pipe Length | 6 500 mm (option 9.5 m) | 6 500 – 9 500 mm | 9 500 – 12 500 mm | 12 500 mm |
| Round Pipe Diameter Range | 15 – 250 mm | 15 – 350 mm | 20 – 350 mm | 30 – 500 mm |
| Square Tube Profile Size | 15×15 – 250×250 mm | 15×15 – 250×250 mm | 20×20 – 350×350 mm | 30×30 – 500×500 mm |
| Laser Source Power | 3 – 12 kW | 6 – 20 kW | 6 – 20 kW | 12 – 20 kW |
| Chuck System Architecture | 3 pneumatic self-centering chucks | 3 full-rotational high-pressure pneumatic chucks | 3 heavy full-rotational servo chucks | 3 ultra-heavy pneumatic chucks with dual clamp |
| Max. Chuck Rotation Speed | 100 rpm | 120 rpm | 80 rpm | 60 rpm |
| Max. Idle Linkage Speed | 100 m/min | 120 m/min | 80 m/min | 70 m/min |
| Max. Acceleration | 1.0 G | 1.2 G | 0.8 G | 0.8 G |
| Remnant Tail Scrap (Zero-Tailing) | 0 mm (Zero-Tailing, full cut) | 0 mm (Zero-Tailing, full cut) | 0 mm (Zero-Tailing, full cut) | 0 mm (Zero-Tailing, full cut) |
| Max. Single Pipe Weight | 300 kg | 450 kg | 800 kg | 1 500 kg |
| Weld Bevel Angle Cutting | Option: bevel ±45° | Bevel ±45° (3D cutting head) | Option: bevel ±45° | Bevel ±45° (3D cutting head) |
| Positioning Accuracy | ±0.03 mm/m | ±0.03 mm/m | ±0.05 mm/m | ±0.05 mm/m |
| Gross Machine Weight | 7 800 kg | 9 500 kg | 13 000 kg | 18 500 kg |
| Machine Dimensions | 11500 × 2600 × 2500 mm | 12500 × 2800 × 2600 mm | 16500 × 3200 × 2700 mm | 19500 × 3600 × 2800 mm |
Other Models in Category
All Category Models →
Precision tube processing for furniture, frames, and fitness equipment with zero waste
Maximum speed and throughput on small-to-medium pipe diameters
Extreme rotation dynamics up to 180 RPM and 2.0G acceleration